If, for example, you want to secure a house number sign to the wall of your house but cannot find a mains socket nearby, the strength of a BOSCH Cordless Impact Drill/Driver comes to the fore.

How to proceed:

Mark two or four drill holes on the sign. Use the metal drill bit to drill holes in the sign.

Then mark the holes on the wall. Use ametal detector to ensure that there are no cables beneath the selected positions on the wall

Insert the masonry bit, enable the impact drilling function and drill the holes in the wall.

Remove the drilling dust from the drilled holes with a vacuum cleaner, with a dust blower or simply blow it out Caution: make sure that you don't get drilling dust in your eyes.

Press in the wall plugs. Knock in lightly with a hammer to ensure that the wall plugs are seated properly.

Replace the drill bit with a screwdriver bit.

Hold the sign at the chosen position and insert the screws into the wall plugs.