Give a metal gate or fence a new shine. The concentration of rust usually sits in the niches and corners of angled ornamentation. The BOSCH Delta Sander is the ideal tool for this.

Proceed as follows:

Clean the gate or fence and remove loose rust using a wire brush. Stubborn rust can be removed using the BOSCH Delta Sander. 

Now sand down the old paint. If you cannot get into every corner with the triangular sanding plate on your BOSCH Delta Sander, replace the sanding plate with the flat sanding finger. The oval sanding finger is ideal for the inner surfaces of circular ornamentation. Otherwise, work with white:Paint sanding sheets.

After sanding, paint the fence or gate with anti-corrosive paint. The finishing coat is then applied.